DOMESTIC  SAVINGS – YOUR FRIDGE  
  
    - Refrigerator       motor and compressor generate heat. Allow enough space for airflow around       refrigerator. If heat gets       trapped, if the heat can't escape, the refrigerator's cooling system       will work harder and use more energy. You see the fridge in grocery shop       fully crowded. How is it in your       house?
    - Make sure that refrigerator's rubber door seals are       clean and tight. They should hold a slip of paper snugly. If paper slips       out easily, replace the door seals. Imagine       fridge as a water tank 165 liter size and inside air leaks out is like       water dripping thro the drain outlet. This is visible loss happening in       fridge.
    - Check your fridge front door today. See to it that it is closing       automatically once you leave your hands off. Tilting the fridge with       the fridge front bottom screws so that, by gravity the door starts closing back gradually & automatically.       And finally the magnetic latches in       door only seal the door. The idea is more the time gap between opening       & closing of fridge door, it is loss of cool air and hence more power       losses.  
    - Give rest to       your fridge 1 hour in the morning by switching off. Whole night it has       worked and ice upto 6 mm builds up in Freezer. Now this 1 hour rest is power saving, no icing in freezer &       fridge is efficient. For manual defrost refrigerator, accumulation of       ice reduces cooling power acting as unwanted insulation.
    - Courtesy BEE,       PCRA, EB, ET sources. Thanks for visiting the site www.energymeasuretosave.com
    - Branded gadgets are available in the market and this       gadget can be hooked between the power socket and the fridge and they do the Auto Defrosting as per the       time settings we set in that.
    - So kindly look into any branded and trusted gadget which can be added to our existing       inefficient appliance and make it more efficient. This is economically       viable option instead of replacing the existing to the latest appliance. Saving on the existing appliance is       more important, if feasible only.
    - Keep your refrigerator or freezer full. An empty       fridge cycles on and off more frequently without any mass to hold the cold. If you are low on foodstuff, keep       PET bottles in the freezer in fridge.
    - Lowering  refrigeration temperature only wastes power.  Set it between 3°C and 5°C, and the freezer temperature between –18°C and  –15°C. We have two types of thermostat  setting for fridge that is summer set and winter set. Depending on the season,  change the settings and achieve power savings.
 
BACK